Xtrada 5 Fork

The 2020 Polygon Xtrada 5 fork from Suntour XCM type with a travel height of 120 mm. This series is also equip with lock out and pre-load features so that it can be adjust to road conditions, whether the road is steep, rocky or smooth paved.

Cockpit

The 2020 Polygon Xtrada 5 for the bike handlebar uses oversized alloy material. The handlebar of this series has a flatbar model with a length of 77 cm. The stem of this series is made of black alloy from Entity with a length of 4 cm. The end of the handlebar of this series has a rubber grip without a lock. The brake lever of this series uses Shimano which is separate from the Shimano Alivio 9 and 2 speed shifters. The shifters in this series have adopted the rapid fire plus system.

Also Read: 2020 MTB XC 

 

Group-Set

The 2020 Polygon Xtrada 5 already uses a hydraulic brake system from Shimano code BL MT200. The disc diameter is 160 mm with a center lock model. Moving on to the drivetrain, the xtrada 5 has a 9 x 2 speed transmission consisting of 9 rows of cassette sprockets on the rear wheels and 2 rows of chain rings at the front. The number of teeth on the sprocket is 11-36T while the number of teeth on the chain ring is 22-36T.

Polygon Xtrada 5 Year 2020 is equip with a crank from Shimano Acera made of alloy with a 2 piece model and a crank arm length of 17.5 cm. The bottom bracket uses the Hollowtech II model from Shimano. For this series pedal uses a flat alloy pedal with a reflector. The RD part that this series uses is a Shimano Alivio with a shadow feature. Meanwhile, the FD section is also from Shimano Alivio with a side swing system. With this alloy this bike is very durable to use.

You have read “Xtrada 5 Fork”